Mitsumi electronic CMY-R200VBK User Manual download pdf

When installing or relocating the unit, check

that no substance other than the specified

refrigerant (R410A) enters the refrigerant circuit.

¡Any presence of foreign substance or air can cause abnormal

pressure rise or explosion.

¡For your safety, thoroughly read the following instructions prior to installation.

Safety Precautions

¡Thoroughly read the following “Safety Precautions” to ensure proper installation.

¡Observe the following important safety precautions at all times.

¡Hazards that can occur from incorrect handling are classified by the symbols below:

Mitsubishi Electric Air Conditioner CITY MULTI

Twinning Kit Installation Manual

WARNING

CAUTION

WARNING

Incorrect handling can result in death or serious injury.

Incorrect handling can result in bodily injury and/or structure damage.

❈

See the Installation Manual that came with the outdoor unit for installation instructions.

CAUTION

Only a dealer or qualified technician should

perform installation.

¡Improper installation may result in refrigerant gas leakage

and equipment damage.

Do not make any modifications or alterations.

Consult your dealer for repair.

¡Improper installation may result in water leakage, electric shock,

or fire.

In the event of a refrigerant leak, thoroughly

ventilate the room.

¡If refrigerant leaks and comes in contact with an open flame,

toxic gases will be generated.

Properly install all parts according to the

instructions in the Installation Manual.

¡If the wrong twinning pipe or wrong size connecting pipe is

used, air conditioning performance will suffer.

After installation, check for a refrigerant leak.

¡If leaked refrigerant comes in contact with a heat source,

such as a fan heater, stove, or electric grill, toxic gases will be

generated.

Properly dispose of packing materials.

¡Plastic bags can pose suffocation and choking hazards: keep

them out of the reach of children. Tear the plastics bags

before disposing of them.

Do not touch the refrigerant pipes and

refrigerant circuit components with bare

hands during and immediately after operation.

¡During or immediately after operation, certain parts of the unit

such as pipes and compressor may be either very cold or hot,

depending on the state of the refrigerant in the unit at the

time. To reduce the risk of frostbites and burns, do not touch

these parts with bare hands.

CMY-R100VBK, CMY-R200VBK

WT05221X02

1 2 3 4

Summary of Contents

Page 1 - Safety Precautions

When installing or relocating the unit, checkthat no substance other than the specifiedrefrigerant (R410A) enters the refrigerant circuit.¡Any presenc

Page 2 - See reverse

1. Confirming the Package ContentsThe following items are included with the Twinning Kit (CMY-R100VBK, CMY-R200VBK). Verify that all items are present

Page 3 - Pipe cover with Cable tie

(3) Routing the pipe through the bottom (1) Braze item 7 high-pressure pipe to the stop valve so that the dimples on the pipe are parallel to the edge

Page 4 - 5. Miscellaneous Notes

WT05221X024. Insulation Cover Installation Install the insulation cover on the twinning kit after brazing the pipes and twinning kit. Insulate all ref

Comments to this Manuals

No comments

Mitsumi electronic CMY-R200VBK User Manual

Browse online or download User Manual for Stoves Mitsumi electronic CMY-R200VBK. Mitsumi electronic CMY-R200VBK User's Manual

Summary of Contents

Comments to this Manuals